IOs-only relay OUTPUTs 8,12MU

Our IO modules are designed for every application in the fields of building automation, industrial automation and infrastructure. With a size of 4/8 or 12MU depending on the total amount of build-in IOs, these IO modules fit in every switchboard cabinet. We offer only IO modules suitable for the 45mm cutout of a standard electric switchboard cabinet.

Basically we deliver two versions of every IO module: One with build-in RS485 interface with MODBUS/RTU Slave protocol and one with Ethernet interface and MODBUS/TCP protocol. All IO modules support also simple ASCII protocol to use the IOs with a media control system or with a IoT controller using Node-RED, NodeJs or Phython. The versions with Ethernet support in addition to MODBUS/TCP Server protocol also MODBUS/RTU protocol via Ethernet. All of our modules have a wide range power supply of 12-48Vdc.

HOW TO CONFIGURE?

Use our free software RESIConfigurator to parameterize and test our IO modules. We deliver for every product a complete ASCII command list and a MODBUS register table with extensive explanation.

In this product group

you will find all of our IO modules with relay outputs for AC or DC signals up to 30Vdc or 250Vac. We offer relays with 8A maximum current or 6A maximum current. But we also offer a special IO module for switching lights capable of 16A and 220µF capacitive load. We use only relays with AgSnO2 contact material. Some of our relay modules have a common power supply, some of them have a changeover relay (Form C), others offer Form A relays (Normally open). In addition we build IO modules with solid state relays (Form A) with 250Vac/dc and 1A or 60Vac/dc and 3 or 6A.