New product

LINUX controller, based on the Raspberry Compute Module 3+® Board, 32GB FLASH, preinstalled Raspian® Buster LINUX and CODESYS® multi core license, Ethernet, 2xUSB2.0, serial interface: 1xRS485, integrated real-time clock with battery backup, 8-way DIP switch and 4 status LEDs in the cover, integrated LTE-M1 modem+SIM card holder, Antenna, Power supply: 12-48V=

More details

Add to wishlist

Interface #2 SIO:1xRS485
Protocol CODESYS

More info

This device consists of: Raspberry compute module 3+® board, 32 GB FLASH with preinstalled Raspian® Buster, preinstalled CODESYS® multi core runtime licence, enclosure for DIN rail and wall mounting, 1 native serial interface integrated: 1xRS485, hardware switching of the RS485 direction, serial interface with two removable 3 pin terminal blocks, Ethernet interface, 2xUSB2.0, integrated clock with battery backup, 8pin DIP SWITCH for setup and 4 LEDs for status display, integrated LTE-M1 modem + SIM card holder, Antenna, integrated power supply 12-48V= with two removeable 2-pin terminal blocks

Size (LxBxH):72x90x62mm
Power supply:12-48V=
Power consumption:18.0W
Mounting:DIN EN50022 rail or wall mounting
Terminals:Terminal type RM5 Cable cross section: max. 2.5 mm², max. 14AWG Screw: M3 Tightening torque: max. 0.5Nm, max. 4.43 Lb-in Terminal type RM3.5 Cable cross section: max. 1.5 mm², max. 16AWG Screw: M2 Tightening torque: max. 0.2Nm, max. 1.77 Lb-in
Protection class:IP20
TARIC number:8538 90 91

Brochure[DE]: RESI-BROCHURE-Raspberry-Pi-DE.pdf
Brochure[EN]: RESI-BROCHURE-Raspberry-Pi-EN.pdf
Data sheet[EN]: RESI-DS-T1-x-CM-EN.pdf
Product attachment[DE,EN]: RESI-PA-T1-B-CM-DE-EN.pdf