New product

LINUX controller based on the Raspberry PI B3+® Board, 16GB SD card, preinstalled Raspian® Buster LINUX, serial interfaces: 1xRS232 and 2xRS485, integrated realtime clock with battery backup, power supply: 12-48V=

More details

Add to wishlist

Interface #1 ETHERNET
Interface #2 SIO:2xRS485+1xRS232
Protocol LINUX

More info

This set contains: Raspberry PI B3+® board, 16 GB Micro SD card with preinstalled Raspian® Buster, enclosure for DIN rail and wall mounting, 3 native serial interfaces integrated: 1xRS232 and 2xRS485, hardware switching of RS485 direction, each serial interface has removable 3 pin terminal clamp, Ethernet interface, 2xUSB2.0, integrated clock with battery backup, integrated power supply 12-48V= with two removeable 2pin terminal clamps

Size (LxBxH):72x90x62mm
Power supply:12-48V=
Power consumption:15.0W
Mounting:DIN EN50022 rail or wall mounting
Terminals:Terminal type RM5 Cable cross section: max. 2.5 mm², max. 14AWG Screw: M3 Tightening torque: max. 0.5Nm, max. 4.43 Lb-in Terminal type RM3.5 Cable cross section: max. 1.5 mm², max. 16AWG Screw: M2 Tightening torque: max. 0.2Nm, max. 1.77 Lb-in
Protection class:IP20
TARIC number:8538 90 91

Brochure[DE]: RESI-BROCHURE-Raspberry-Pi-DE.pdf
Brochure[EN]: RESI-BROCHURE-Raspberry-Pi-EN.pdf
Data sheet[EN]: RESI-DS-T8-x-EN.pdf
Product attachment[DE,EN]: RESI-PA-T8-B-DE-EN.PDF