RESI-xLED-SIO,ETH

Our LED gateways are used to integrate LED lights, LED spots or LED strips. Regardless of whether they are single-color, two-color (cold white-warm white) or RGB/RGBW LED strips. All of these types can be controlled with our RESI-xLED-SIO or RESI-xLED -ETH gateways. These gateways control LED strips with constant voltage (12V= or 24V=) and a common anode via PWM modulation.

Our RESI-2LEDWS-SIO, RESI-2LEDWS-ETH or RESI-2LEDWS-USB gateways are used to control modern LED strips based on WS2812 or WS2805 chips. With these LED strips, each LED point can shine in a different color and many decorative lighting effects can be achieved.

Our gateways are intended for connection to any type of controller:
PCs, PLCs, DDCs, media controls, minicomputers, Raspberry Pi's, Arduino's or special hardware

The gateways are integrated via MODBUS protocol or using simple ASCII text commands.

HOW TO CONFIGURE?
Use our free software RESIConfigurator to configure and test our LED gateways.

LED controller: RESI-4LED-SIO:LED controller with 12xPWM outputs for constant voltage LED stripes, MODBUS/RTU+ASCII, 1xRS485

RESI-1LED-SIO:LED controller with 3xPWM outputs for constant voltage LED stripes, MODBUS/RTU+ASCII, 1xRS232+1xRS485
RESI-1LED-ETH:LED controller with 3xPWM outputs for constant voltage LED stripes, MODBUS/TCP+ASCII, 1xEthernet
RESI-4LED-SIO:LED controller with 12xPWM outputs for constant voltage LED stripes, MODBUS/RTU+ASCII, 1xRS485
RESI-4LED-ETH:LED controller with 12xPWM outputs for constant voltage LED stripes, MODBUS/TCP+ASCII, 1xEthernet
RESI-2LEDWS-SIO:2 channel LED controller for max. 1024 WS2805 or WS2812 LED chips, MODBUS/RTU+ASCII, 1xRS232+1xRS485
RESI-2LEDWS-ETH:2 channel LED controller for max. 1024 WS2805 or WS2812 LED chips, MODBUS/RTU+ASCII, 1xEthernet
RESI-2LEDWS-USB:2 channel LED controller for max. 1024 WS2805 or WS2812 LED chips, MODBUS/RTU+ASCII, 1xUSB