RESI-ENO-SIO,ETH,GW,GW-ETH

With our ENOCEAN gateways you can integrate every kind of ENOCEAN sensor into your solution. Our gateways support the European standard of ENOCEAN (868MHz).

Your controller communicates with MODBUS or ASCII via RS232, RS485 or Ethernet?
Then our RESI-ENO-SIO and RESI-ENO-ETH gateways are the right choice!
Simple configure the ENOCEAN devices and the MODBUS mapping and read-out the received data.

Your system offers a RS232/RS485 or Ethernet and can handle the Enocean Serial Protocol 3® (ESP3) in it's software?
Then use our RESI-ENO-GW and RESI-ENOGW-ETH gateways to communicate with ENOCEAN Sensors. Also the RESI-ENO-GW can be used together with the original DolphinView® software,

Do you search for a KNX-ENOCEAN device for on-wall mounting ?
Then our RESI-RG-ENO2-K device will fulfill the task. The ENOCEAN-KNX mapping is done via a special software from us. It is NOT programmable with the ETS software!

Our gateways are intended for connection to any type of controller:
PCs, PLCs, AutoGers, media controls, minicomputers, Raspberry Pi's, Arduino's or special hardware

The gateways are integrated via MODBUS protocol or using simple ASCII text commands.

HOW TO CONFIGURE?
Use our free software RESIConfigurator to configure and test our ENOCEAN gateways.