RESI-KNX-SIO,ETH,GW,PS,MBMASTER

Our KNX gateways enable the integration of a KNX system into your system. There are various options available for this:

Your controller can communicate with MODBUS via RS232, RS485 or Ethernet?
Then our RESI-KNX-SIO and RESI-KNX-ETH gateways are the right choice!
They enable the bidirectional exchange of data between your controller software and the KNX devices on the KNX bus.

Your media control can send/receive ASCII texts via RS232, RS485 or Ethernet?
Then our RESI-KNX-GW and RESI-KNXGW-ETH gateways offer easy integration of a KNX system into your overall solution.

Our RESI-KNX-PS supplies a KNX bus with max. 160mA and is intended for small KNX systems.

Our gateways are intended for connection to any type of controller:
PCs, PLCs, AutoGers, media controls, minicomputers, Raspberry Pi's, Arduino's or special hardware

The gateways are integrated via MODBUS protocol or using simple ASCII text commands.

Our RESI-KNX-MBMASTER gateway communicates bidirectionally between KNX and MODBUS devices. The MODBUS slaves are connected either via RS485 or RS232. This means, you can easily connect MODBUS input/output modules or heat pumps or cooling systems with a MODBUS slave interface to a KNX system.

HOW TO CONFIGURE?
Use our free software RESIConfigurator to configure and test our KNX gateways.